Home (contents) → Miscellaneous → Variometers
Variometers
When you attain a large height above the ground, it is impossible to discern whether you are rising or sinking. To assist the pilot in staying in rising air, the variometer was adapted from the sailplane world (conventional cockpit gliders).
Flask variometers
A vario system I set up in the early 70s. This is the earliest use of a vario in a modern hang glider that I am aware of. I used it at the Annie Green Springs prelim test meet practice session.
— Dave Cronk via e-mail in 2020 (see Cronk works)
Annie Green Springs (a wine label of the commercial sponsor) was the U.S. national hang gliding championships of 1973.
A main component was a flask, which contains only air. However, because the sensor measured air exiting or entering through a small tube as a result of changes in pressure of the surrounding air, the flask had to be rigid to prevent in bulging or caving in instead. Furthermore, it had to be insulated against temperature changes. (The air generally is colder higher up.) I covered the flask I made, using a length of plastic drainpipe, in layered aluminium foil and transparent plastic. A major problem was that you had to watch the dial (or a couple of pith balls rising in little transparent tubes on mine) to determine whether you were going up or down. In hang gliding, you really need to be looking about you.
That barrier to sensory input was overcome by using a different sense.
Sound barrier
More sophisticated variometers were soon manufactured with internal flasks and, critically, with audio tones that indicated lift or sink. You could then maintain a good look out and listen to the variometer to assist in centering on the strongest lift. As far as I know, the first of these was created by USHGA member 007, Frank Colver. Frank’s son Matt used a cobbled together first version (taped to his control bar) in the 1973 Annie Green Springs competition (see Annie Green Springs 1973 briefing photo key). Before the contest was over, pilots were trying to buy it. However, he could not sell it because he needed to make sure he could duplicate it. (1)
Frank Colver also designed and built advanced hang gliders. See Appliance of science in Hang gliding 1974 part 4. See also the links to Frank’s web site and to the US Hawks forum under External links later on this page.
The Flight Designs variometer was identical to the Likek Hummingbird except in its colors and emblem on the dial face, being manufactured by Litek and all repairs being undertaken by Litek.(2) Although it is electronic, it is (as far as I know) still a flask type, measuring air flowing into and out of the rectangular metal container as the pressure of the surrounding air changes.
(Litek, initially of Grant’s Pass, Oregon, and then of Campbell, California, was started in January 1978 by Chuck Kanavle. 1)
Miniaturization
The Systek II variometer was about three inches by two by two.
Miniaturization confers some advantages, but it makes the switches harder to use. Some pilots need to change settings in flight with gloved hands.
Ergonomics
Gary Dear built this Motronics variometer in 1998 from circuit diagrams and other drawings provided by its designer Kevin Byrne, a former sailmaker at Aerial Arts. (See Southdown Sailwings, Vulturelite, and Aerial Arts of Sussex, England.) I am told that variometers of this type do not contain a ‘flask’ of air, but instead rely on an electronic pressure transducer.
Manufactured initially by Kevin Byrne, hang gliding school Lejair took over production subsequently. (See Lejair (Tony and Rona Webb).) Nowadays Kevin lives in a converted World War 2 airfield control tower near a major hang gliding site in Wiltshire, England.
The Renschler Como is a lightweight and compact multi-function variometer. Very basic and inexpensive by modern standards.
Total energy compensation
The ‘flight deck’ mounted on the right control frame down-tube in this 1984 photo is fitted with an impeller that protrudes into the air-flow on a stalk to register airspeed. That information is not displayed to the pilot, who flies by the feel of the glider and the sound of the air flow. It is fed instead to the variometer. Because changes in airspeed cause transitory climbs and descents, which impart false impressions of the rise or fall of the surrounding air (a so-called stick thermal) the total energy compensating variometer ignores those transitory vertical motions, so providing the pilot with a truer indication of lift and sink. (For more photos by Jan Kulhavy, see Grouse Mountain invitational 1984.)
Related
Marty Alameda and Flight Designs, who offered a re-badged Litek Hummingbird
External links
Colver Skysail & vario stuff on US Hawks Hang Gliding Association forum
Frank Colver, USHGA #7, hang glider designer and creator of the Colver variometer of 1973
Stick thermal in Wikipedia
References
1. Whole Air, October 1984
2. Flight Designs variometer vs. the Likek Hummingbird: Glider Rider, June 1980
Hang Gliding History 
Hi Everard,
I seem to remember the ‘BALL’ vario/altimeter was very good.
I could never afford one, but was on my Christmas list.. still never got one.. !!
Stay Safe
LikeLike
Hi Brian, Ball variometers had a good reputation. One team at a women’s world championship held at Chelan, Washinton, in the early 1990s I think, were all equipped with Ball variometers and they named the team Women with Balls!
LikeLike
My first was a Makiki pellet vario. Two small tubes as I recall, one with a green pellet and one with a red. I upgraded to an audio only Colver, which seems to be a fairly rare item. The audio Colver was a great instrument.
LikeLike